Aminet 32/Aminet 32 (1999)(Schatztruhe)[!][Aug 1999].iso/Aminet/biz/swood/fwml9905.lha/FWML9905

Text File | 1999-06-05 | 118KB | 3,726 lines

   From: Jürgen =?iso-8859-1?Q?M=FCller?= <[e-mail]>
   Date: 01.05.1999, 10:28:54
Subject: Re: Loading fonts

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Marion

On 01-Mai-99, you wrote:

> SoftPartners stated on their page that based on the response for the
> FinalOffice CD that further development of the Final series of products
> would continue and they would offer a FinalOffice2.0 CD with improved
> versions of the software. I guesss there wasn't enough interest. Are they
> dead now also?

I'd like to see an update of FW97 too. But I don't buy FinalOffice CD. If
there is an update of FW97 I'd buy the FinalOffice2.0 CD. Is there a site
whre I can vote for FinalOffice2.0 CD?

Regards
--
Jürgen Müller
*Team Amiga*
ICQ UIN: 36642173


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 01.05.1999, 16:48:34
Subject: Re: Loading fonts

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 01-May-99 at 04:28:54, Jürgen Müller wrote these words of wisdom:
> Hello Marion On 01-Mai-99, you wrote:
>
>> SoftPartners stated on their page that based on the response for the
>> FinalOffice CD that further development of the Final series of products
>> would continue and they would offer a FinalOffice2.0 CD with improved
>> versions of the software. I guesss there wasn't enough interest. Are they
>> dead now also?
>
> I'd like to see an update of FW97 too. But I don't buy FinalOffice CD. If
> there is an update of FW97 I'd buy the FinalOffice2.0 CD. Is there a site
> whre I can vote for FinalOffice2.0 CD?

That isn't the way it works. You "vote" by buying the FinalOffice1.0 CD. But
I don't know if you can buy it now or not. You could try contacting
SoftPartners. They have a postal address and a phone number on their webpage
at http://www.softpartners.com on the contact page. They apparantly do not
answer email. The price of the CD with all the Final series of products is
suggested retail at $100US which is less than FW costs by itself. They had
preorder discounts on the CD before it was supposedly pressed... but that
also is past date now.

If you check the webpage it tells all about this.

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /     * A M I G A   I N T E R N A T I O N A L   I N C *
Team      \_/_//_/           and     * * A M I G A   I N C * *
AMIGA                    My homepage  *  http://www.users.kih.net/~mwyatt


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Jürgen =?iso-8859-1?Q?M=FCller?= <[e-mail]>
   Date: 02.05.1999, 09:22:11
Subject: Re: Loading fonts

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Marion

On 01-Mai-99, you wrote:

>> I'd like to see an update of FW97 too. But I don't buy FinalOffice CD. If
>> there is an update of FW97 I'd buy the FinalOffice2.0 CD. Is there a site
>> whre I can vote for FinalOffice2.0 CD?
>
> That isn't the way it works. You "vote" by buying the FinalOffice1.0 CD.
> But I don't know if you can buy it now or not. You could try contacting
> SoftPartners. They have a postal address and a phone number on their
> webpage at http://www.softpartners.com on the contact page. They
> apparantly do not answer email. The price of the CD with all the Final
> series of products is suggested retail at $100US which is less than FW
> costs by itself. They had preorder discounts on the CD before it was
> supposedly pressed... but that also is past date now.

I don't want to buy the FinalOffice1.0 CD because I've bought FW97.
I only buy my software here in Germany. Softpartners should know that there
is a need for updates without buying the stuff that many users already
have.

> If you check the webpage it tells all about this.

I'll check the page.

Regards
--
Jürgen Müller
*Team Amiga*
ICQ UIN: 36642173


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: H.J.C. Sam <[e-mail]>
   Date: 03.05.1999, 09:32:42
Subject: RE: SoftWood Site (fwd)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Mon, May 3, 1999, at 10:46 AM, Tiit wrote:

Tiit, and then what? They do not sell anything for Amiga anymore. They have the
old, very old FaQ. I far as I am concerned they are bye, bye.
Johann


> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> You can get to it by entering http://www.softwood.com/softwood.
>
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Tiit <[e-mail]>
   Date: 03.05.1999, 10:46:41
Subject: Re: SoftWood Site (fwd)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

You can get to it by entering http://www.softwood.com/softwood.


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Tiit <[e-mail]>
   Date: 03.05.1999, 16:32:32
Subject: RE: SoftWood Site (fwd)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Mon, 3 May 1999, H.J.C. Sam wrote:

>            ....They do not sell anything for Amiga anymore. They have
> the old, very old FaQ. I far as I am concerned they are bye, bye.
> Johann

Appears that way.  I was just surprised to see the website up again.


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andrew Bruno <[e-mail]>
   Date: 05.05.1999, 14:02:51
Subject: Final Writer and CV_PPC screens.

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi,

Can anyone tell me how to make the "blank" page in FW be the full screen
size when I start FW on my CV_PPC screen?

1024/768.

I have tried saving as default, etc, but it doesn't seem to work; or I
missed something.  ;)

TIA

Cya!
--
Yo mama's like Nintendo, Now she's portable.


Andrew Bruno
[e-mail]



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 05.05.1999, 14:33:22
Subject: RE: Final Writer and CV_PPC screens.

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Wed, May 5, 1999, at 02:02 PM, Andrew Bruno wrote:

   Andrew, would'nt the screen resolution be determined in Project
   Prefrences/Startup/screen option be established?
   Johann


> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi,
>
> Can anyone tell me how to make the "blank" page in FW be the full screen
> size when I start FW on my CV_PPC screen?
>
> 1024/768.
>
> I have tried saving as default, etc, but it doesn't seem to work; or I
> missed something.  ;)
>
> TIA
>
> Cya!
> --
> Yo mama's like Nintendo, Now she's portable.
>
>
> Andrew Bruno
> [e-mail]
>
>
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Warren Katchmar <[e-mail]>
   Date: 05.05.1999, 15:09:58
Subject: Re: Final Writer and CV_PPC screens.

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Andrew,


Have you tired saving in Project/Prefs then Startup?  You can set the screen that
you want FinalWriter to start with, IE 1024/768.



AB Hi,

AB Can anyone tell me how to make the "blank" page in FW be the full screen
AB size when I start FW on my CV_PPC screen?

AB 1024/768.

AB I have tried saving as default, etc, but it doesn't seem to work; or I
AB missed something.  ;)

AB TIA

AB Cya!
--
<tsb>

<sb> Warren T. Katchmar

<tsb>





----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 06.05.1999, 11:58:12
Subject: RE: Page-Question

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Thu, May 6, 1999, at 01:25 PM, Andreas Meyer wrote:

    Andreas, although I am not using DINA4, (using US standard) but this schould
    not make a difference. If I would have to do what you seam to say, I would
    use two columns. As far as labels are concerned, I use what is available in
    stock paper and make my own templates. However you may want to check on
    Aminet in FW for macros. There is at least one macro for computer disks,
    Popeye I think.
    Hope I could help.
    Johann

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi All!
>
> Wanted to ask, if there is a possibilty to get the content of one
> DINA4-side
> four times on such a side? Means I want to share a side in four parts and
> put the content of one side in one part of the four so I got the content
> four times on one side. Hope you get me right....
>
> BTW Does anybody know a good and easy to use tool I can create and print
> labels with for the use on bottles, postpakets, disks and so on?
>
>
> Regards
>
> --
>
>
> -- Andreas Meyer --
> --
>
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andreas Meyer <[e-mail]>
   Date: 06.05.1999, 13:25:02
Subject: Page-Question

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi All!

Wanted to ask, if there is a possibilty to get the content of one DINA4-side
four times on such a side? Means I want to share a side in four parts and
put the content of one side in one part of the four so I got the content
four times on one side. Hope you get me right....

BTW Does anybody know a good and easy to use tool I can create and print
labels with for the use on bottles, postpakets, disks and so on?


Regards

--


-- Andreas Meyer --
--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Tom Dolan <[e-mail]>
   Date: 07.05.1999, 13:35:06
Subject: Re: Final Writer and CV_PPC screens.

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi there,

> Can anyone tell me how to make the "blank" page in FW be the full screen
> size when I start FW on my CV_PPC screen?
>
> 1024/768.
>
> I have tried saving as default, etc, but it doesn't seem to work; or I
> missed something.  ;)

Presuming you are using FW97 the following should help.

You can set the resolution of the startup screen from the Preferences
in the Project menu. Select the Startup tab and click the required
screen option and the number of colours required. Also select the Open
new Screen button from the screen type list.

If you want to set the default size of the page and window for
startup and for new documents you must do this from the View Menu.
Firstly stretch your document window to the full size of your
screen then select Preferences from the View menu and click the
Display Tab. You can select the required level of page zoom with the
Magnify gadget and then click the Save As Default box in the Window
Size gadget and select save. This should sort out your problem but you
might like to experiment with various Screen DPI combinations as shown
on the Display Tab to fine tune your screen display.

I hope this helps,


--
TomD

Homepage: http://www.iol.ie/~tomdolan

Hardware: A4000 Cyberstorm 060/50mHz 50Mb, Picasso IV,
                  17" NDC monitor, 24x CDRom, Epson colour 600,
                  Epson Scanner, Oktagon scsi, Dynalink modem etc.
                  (A1200 040/25, A500 030/40)

     - In moments of true decision, your future is born. -

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andreas Meyer <[e-mail]>
   Date: 07.05.1999, 18:38:55
Subject: Re: Page-Question

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello H.J.C.,

Am 06-Mai-99 schriebst Du:

>    Andreas, although I am not using DINA4, (using US standard) but this
> schould
>    not make a difference. If I would have to do what you seam to say, I
> would
>    use two columns. As far as labels are concerned, I use what is
> available in
>    stock paper and make my own templates. However you may want to check
> on
>    Aminet in FW for macros. There is at least one macro for computer
> disks,
>    Popeye I think.
>    Hope I could help.

I´m not an experienced user with FinalWriter but I made two columns like
you said and took the thames4.font. Copied the text into the clipboard two
times and duplicated it and as result I have this text four times on my A4-Page.
Didn´t think I would get it like this :-)

The printing on my HP-Deskjet is not that fine, maybe I find a better
delicate little font an try it again. Thanks for your help!


Regards

--


-- Andreas Meyer --
--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From:  <[e-mail]>
   Date: 08.05.1999, 10:47:38
Subject: VPOP3 Alert - Non-existent user

Delivery Failure Report.
There was incoming mail for non-existent user "AnMeyer".


---------------------------------------
Received: by age (VPOP3) with POP3; Sat, 8 May 1999 10:47:37 +0200
Return-Path: <[e-mail]>
Delivered-To: [e-mail]
Received: (qmail 24706 invoked from network); 8 May 1999 04:06:23 -0000
Received: from nf7.netforward.com (204.57.67.54)
  by mail.okay.net with SMTP; 8 May 1999 04:06:23 -0000
X-Forwarder: NetForward.com
Received: from sq1946.olympus.net ([207.149.194.6] helo=olympus.net)
    by olympus.net with smtp (Exim 2.02 #1)
    id 10fTLn-00038w-00; Thu, 6 May 1999 11:58:28 -0700
X-Mailer: AEMail (Amiga EMail), Version 2.01 (registered), (c) 1997-1999 by John F. Zacharias
From: "H.J.C. Sam" <[e-mail]>
Reply-To: [e-mail]
To: Andreas Meyer <[e-mail]>, [e-mail]
Subject: RE: Page-Question
Mime-Version: 1.0
Content-Type: Text/Plain
Content-Transfer-Encoding: 8bit
Date: Thu, 6 May 1999 11:58:12 -0700 (PDT)
Message-Id: <[e-mail]>

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Thu, May 6, 1999, at 01:25 PM, Andreas Meyer wrote:

    Andreas, although I am not using DINA4, (using US standard) but this schould
    not make a difference. If I would have to do what you seam to say, I would
    use two columns. As far as labels are concerned, I use what is available in
    stock paper and make my own templates. However you may want to check on
    Aminet in FW for macros. There is at least one macro for computer disks,
    Popeye I think.
    Hope I could help.
    Johann

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi All!
>
> Wanted to ask, if there is a possibilty to get the content of one
> DINA4-side
> four times on such a side? Means I want to share a side in four parts and
> put the content of one side in one part of the four so I got the content
> four times on one side. Hope you get me right....
>
> BTW Does anybody know a good and easy to use tool I can create and print
> labels with for the use on bottles, postpakets, disks and so on?
>
>
> Regards
>
> --
>
>
> -- Andreas Meyer --
> --
>
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>




**********
   From: DJNick <[e-mail]>
   Date: 08.05.1999, 15:04:43
Subject: Re: fwml_admin Response

fwml_admin SUBscribe finalwriter




**********
   From: Morten Bjergstrøm <[e-mail]>
   Date: 14.05.1999, 02:46:52
Subject:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Is this mailing list dead?


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Bob Arceneaux <[e-mail]>
   Date: 15.05.1999, 08:06:52
Subject:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi, Morten, on 14-May-99 you wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

> Is this mailing list dead?

No.  Just quiet.


   Bob
--
<tsb> Bob Arceneaux - *Team #AMIGA#*
<sb> Mandeville, Louisiana, USA
<sb> /You know you're a redneck if/
<tsb>   *You think people who have electricity are uppity.*


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Bruce Moi <[e-mail]>
   Date: 15.05.1999, 09:34:04
Subject: Re.Is this list dead?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 14-May-99, Morten Bjergstrøm wrote:




>is this mailing list dead?


>______________________________________________________

I'm still lurking here! I think perhaps it's just resting.  :>)

--
Greetings from Comox,
on Vancouver Island,
in beautiful British Columbia!.

Bruce


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: DJNick <[e-mail]>
   Date: 15.05.1999, 13:41:43
Subject:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Morten

On 14-May-99, Morten Bjergstrøm wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Is this mailing list dead?

Hey - it is not dead :0)

Now lets see if I'm subscribed...

Regards
--
<tsb>D.J.Nick | D-Tronic, Sindjeliceva 11/8, 14000 Valjevo, Serbia (YU)
<tsb>Tel: [phone] Email: [e-mail]  ICQ: 13794052
<tsb>
<tsb>Amiga1200T PPC 603e on 200MHZ 040/25, BlizzardVision 8MB gfx card
<tsb>50MB; 2.1 & 1.1GB HDs; Sony 12X CDRom; 33.6 Modem; PowerFlyer
<tsb>17" DTK; MIDI; GVP Dss 8+; HP 6L printer & 3Button mouse

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Warren Katchmar <[e-mail]>
   Date: 16.05.1999, 14:12:14
Subject: Re: Re.Is this list dead?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello,

I bet it would be more active if there was a new version:-)



BM> is this mailing list dead?


BM> ______________________________________________________

BM I'm still lurking here! I think perhaps it's just resting.  :>)

--

<tsb>

<sb> Warren T. Katchmar

<tsb>






----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Jürgen =?iso-8859-1?Q?M=FCller?= <[e-mail]>
   Date: 16.05.1999, 21:38:59
Subject:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello DJNick

On 15-Mai-99, you wrote:

>> Is this mailing list dead?
>
> Hey - it is not dead :0)
>
> Now lets see if I'm subscribed...

Seems you are subscribed. :-)

Regards
--
Jürgen Müller
*Team Amiga*
ICQ UIN: 36642173


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Charles Birkner <[e-mail]>
   Date: 17.05.1999, 07:53:23
Subject: Re: (no subject)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 15-May-99, DJNick wrote:
>Thanks for using NetForward!
>http://www.netforward.com
>v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>Hello Morten

>On 14-May-99, Morten Bjergstrøm wrote:
>> Thanks for using NetForward!
>> http://www.netforward.com
>> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>>
>> Is this mailing list dead?

>Hey - it is not dead :0)

>Now lets see if I'm subscribed...

Rats! and here I was, enjoying the break from so many messages...  Oh well, I
was enjoying a break too.. (sigh)  <G>

--
Charles Birkner                              [e-mail]
State of the Art Technologies                voc:[phone]x110
P.O. Box 38244                               fax:[phone]
Greensboro, NC 27438-8244 USA


   //
 \X/  Windows98=Workbench89
-------------------------------------------------------------------------



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Phyllis J. Edberg <[e-mail]>
   Date: 17.05.1999, 10:41:05
Subject:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Morten

Well, one of us is still here.
I am looking for a very small program for Final Writer (or any Amiga
program) which will print font samples in the following manner:

**********************************************
Font   :  `name of font' (Outline, for example)
Size   :  14, 18, 26, 34,

Sample Printout - - - - - -alphabet or whatever
**********************************************

I had something once about a million years ago, but the program has
disappeared. PageStream has something for its own fonts but it is not the
same thing. I would like to print the woorkbench fonts. Anyone have
something?



On 14-May-99, Morten Bjergstrøm wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Is this mailing list dead?
>
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>
Regards



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: ROBERT MEYERS <[e-mail]>
   Date: 17.05.1999, 14:13:41
Subject: Re: No subject given

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Morten

Well, one of us is still here.
I am looking for a very small program for Final Writer (or any Amiga
program) which will print font samples in the following manner:

**********************************************
Font   :  `name of font' (Outline, for example)
Size   :  14, 18, 26, 34,

Sample Printout - - - - - -alphabet or whatever
**********************************************

I had something once about a million years ago, but the program has
disappeared. PageStream has something for its own fonts but it is not the
same thing. I would like to print the woorkbench fonts. Anyone have
something?

     Try this:

     http://wuarchive.wustl.edu/pub/aminet/text/font/FontList.lha

     Short:  Prints list of fonts in FONTS: device
     Author: Robert Brandner
     Source: Fish collection

     Prints a list of the fonts in the FONTS: device to the printer.
     Prints
     name, available sizes and some text using the specified font.


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 17.05.1999, 16:30:06
Subject: RE:

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Mon, May 17, 1999, at 10:41 AM, Phyllis J. Edberg wrote:

Phyllis, take a look at Aminet biz/swood/fontaloger.lha and
biz/swood/MFontList.lha.  May be it is what you are looking for. I have not
tried it thus far.
Johann



> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hello Morten
>
> Well, one of us is still here.
> I am looking for a very small program for Final Writer (or any Amiga
> program) which will print font samples in the following manner:
>
> **********************************************
> Font   :  `name of font' (Outline, for example)
> Size   :  14, 18, 26, 34,
>
> Sample Printout - - - - - -alphabet or whatever
> **********************************************
>
> I had something once about a million years ago, but the program has
> disappeared. PageStream has something for its own fonts but it is not the
> same thing. I would like to print the woorkbench fonts. Anyone have
> something?
>
>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Warren Katchmar <[e-mail]>
   Date: 17.05.1999, 16:58:25
Subject: Re: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello,

I don't know what you sent but it was nothing that I could read????

JD N § Çè®ë"

--

<tsb>

<sb> Warren T. Katchmar

<tsb>






----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: James Maxton Dexter <[e-mail]>
   Date: 17.05.1999, 17:02:02
Subject: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Q2FuIGFueW9uZSBvdXQgdGhlcmUgdGVsbCBtZSB0aGUgdmVyeSBsYXRlc3QgdmVyc2lvbiBvZiBG
aW5hbFdyaXRlcj8NCklzIGl0IEZpbmFsV3JpdGVyICc5Nz8gSWYgc28sIGFyZSB0aGVyZSBkaWZm
ZXJlbnQgdmVyc2lvbnMgb2YgaXQ/DQpEb2VzIGFueW9uZSBoYXZlIGEgY29weSB0aGF0IHRoZXkg
d291bGQgbGlrZSB0byBzZWxsPyBJIHdvdWxkIG9mDQpjb3Vyc2UsIHByZWZlciB0aGUgZnVsbCBj
b21tZXJjaWFsIHZlcnNpb24gY29tcGxldGUgd2l0aCBtYW51YWxzLg0KDQpUaGFua3MgaW4gYWR2
YW5jZS4NCg0KSmltIERleHRlcg0K


LS0tLQ==

dG8gdW5zdWJzY3JpYmUgZnJvbSBmd21sLCBzZW5kIG1haWwgdG8gImZ3bWxfYWRtaW5AdGhlcGVudGFnb24uY29tIiB3aXRo
InVuc3Vic2NyaWJlIGZpbmFsd3JpdGVyIiBpbiB0aGUgbWVzc2FnZS1ib2R5LiBUbyBnZXQgaGVscCwgc2VuZCAiaGVscCIu
VmlzaXQgdGhlIEZpbmFsIFdyaXRlciB3ZWJzaXRlIGF0IGh0dHA6Ly9zdXJmLnRvL2ZpbmFsd3JpdGVy


**********
   From: Jürgen =?iso-8859-1?Q?M=FCller?= <[e-mail]>
   Date: 17.05.1999, 18:32:20
Subject: Re: Re.Is this list dead?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Warren

On 16-Mai-99, you wrote:

> Hello,
>
> I bet it would be more active if there was a new version:-)

A new version wouldn't be bad and I would pay for it.¶
I'm missing a char that indicates me the end of a paragraph.¶

Regards¶
--
Jürgen Müller
*Team Amiga*
ICQ UIN: 36642173


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Charles Birkner <[e-mail]>
   Date: 17.05.1999, 23:16:55
Subject: Re: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
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LS0tLQ==

dG8gdW5zdWJzY3JpYmUgZnJvbSBmd21sLCBzZW5kIG1haWwgdG8gImZ3bWxfYWRtaW5AdGhlcGVudGFnb24uY29tIiB3aXRo
InVuc3Vic2NyaWJlIGZpbmFsd3JpdGVyIiBpbiB0aGUgbWVzc2FnZS1ib2R5LiBUbyBnZXQgaGVscCwgc2VuZCAiaGVscCIu
VmlzaXQgdGhlIEZpbmFsIFdyaXRlciB3ZWJzaXRlIGF0IGh0dHA6Ly9zdXJmLnRvL2ZpbmFsd3JpdGVy


**********
   From: Joseph Shaughnessy <[e-mail]>
   Date: 18.05.1999, 07:56:26
Subject: Re: Font List

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Lurking becomes tiresome, or I'm annoyed, or bored, or whatever... I reply:

Phyllis J. [e-mail]17-May-99 19:41:05

 PJE> I am looking for a very small program for Final Writer (or any Amiga
 PJE> program) which will print font samples in the following manner:

 PJE> **********************************************
 PJE> Font   :  `name of font' (Outline, for example)
 PJE> Size   :  14, 18, 26, 34,

 PJE> Sample Printout - - - - - -alphabet or whatever
 PJE> **********************************************

 PJE> I had something once about a million years ago, but the program has
 PJE> disappeared. PageStream has something for its own fonts but it is not
 PJE> the same thing. I would like to print the woorkbench fonts. Anyone have
 PJE> something?

 I have a file from Aminet (Softwood area) that is called MFontList.lha. It
is supposed to do what you want. I have never used it though. If you can't
find it there, I'll send it to you.

Regards,

--
  Joe Shaughnessy  #*SHAG*#                //   [e-mail]
                                     \X/
                     Nevertheless, I'd rather use an Amiga
--

Ordinary decent people in this country are sick and tired of being told
that ordinary decent people in this country are fed up with being sick
and tired. I am certainly not, and I'm sick and tired of being told that
I am. (M. Python)


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Billy Horton <[e-mail]>
   Date: 18.05.1999, 12:50:12
Subject: Re: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello James,

On 17-May-99, James Maxton Dexter wrote:

> N § Çè®ë"

Please watch what you say, there may be ladies present. :-)

Regards,
Billy Horton
Video Image Productions
Hattiesburg, MS
The birthplace of Rock-N-Roll (look it up!)
-----------------------------------------------
Any given program, when running, is obsolete.


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: James Maxton Dexter <[e-mail]>
   Date: 19.05.1999, 00:13:34
Subject: Re: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v



Billy Horton wrote:

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hello James,
>
> On 17-May-99, James Maxton Dexter wrote:
>
> > N § Çè®ë"
>
> Please watch what you say, there may be ladies present. :-)
>
> Regards,
> Billy Horton

Sorry for the gibberish. I believe I was using MS Outlook Express,
which I don't think I've ever used to post email before. Must be
some problem in the way I have it currently configured. I'll look into
it later, for now I'll continue using my regular email program.Netscape
Communicator's Composer.

My original post was as follows:

Could someone tell me what the very last version of FinalWriter is? Is it
FinalWriter '97? Also, does anyone have the latest version of FinalWriter
for sale? I prefer the full commercial edition, complete with printed
manuals, etc.

Thanks in advance for any help you may be able to give me.

Jim Dexter
USA


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Wil Haslup <[e-mail]>
   Date: 19.05.1999, 16:01:43
Subject: Re: Final FinalWriter version?

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi James

On 19-May-99, you wrote:

> Could someone tell me what the very last version of FinalWriter is? Is it
> FinalWriter '97? Also, does anyone have the latest version of FinalWriter
> for sale? I prefer the full commercial edition, complete with printed
> manuals, etc.
>

Final Writer 97 was the last upgrade I got.

Sorry don't have one for sale.

Regards
--

Wil

<tsb>
-- [e-mail] - http://www.erols.com/dhaslup -
<tsb>

The only completely consistent people are the dead.
--Aldous Huxley

<tsb>




----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Vivek Menon <[e-mail]>
   Date: 20.05.1999, 06:44:31
Subject: html and jpeg

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

HI,
I have FW97, and want to be able to use it to update my web page.  I an't
load jpgs without crashing, and I can't save as html without crashing.  I
think FW5 was supposed to work with this.  Is there any way around these
problems?

-Vivek A. Menon


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Richard M Delzenero <[e-mail]>
   Date: 20.05.1999, 15:25:07
Subject: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi,
    I have FW97 and received an email via YAM that had
an attachment with name ending in ".doc". I am assuming this
is a Word format file. Should I be able to read this with
FW97 as long as it contains nothing fancy (e.g. tables)?
Many thanks in advance for any response!

-- rich delzenero


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 20.05.1999, 17:32:35
Subject: RE: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Thu, May 20, 1999, at 03:25 PM, Richard M Delzenero wrote:

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi,
>     I have FW97 and received an email via YAM that had
> an attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!
>
> -- rich delzenero


Richard, MS Word is a binary file. You can load it into FW and take out the
binary info. The text should be there. You are right, if it is tables or such
formated info, you will not be able to get it in that format.
Johann



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: dit <[e-mail]>
   Date: 20.05.1999, 18:19:36
Subject: Re: MS doc files(?)

Rich,

You can probably read it, but it won't be very pretty.  I just loaded a
.doc file containing 2-1/2 pages of actual plain text.  The plain text
was preceded by a half page of garbage and followed by another 8 pages
of garbage.  Actually, what I'm calling "garbage" is stuff that MS Word
apparently uses to keep track of fonts, format, etc.


>         I have FW97 and received an email via YAM that had
> an attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!

> -- rich delzenero


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter

----------------------------------------------------------------------
                                   *"""*                              u
                                  *     *   Member of CA Carvers Guild
            _/_/      _/_/_/_/_/ *       *      and Craft-T-Carvers   u
      ///  _/ _/   _/    _/      *·*   *·*   +----------------------+ u
     ///  _/  _/        _/      ·* o` 'o *·  | AV Amiga Users Group | u
    ///  _/  _/  _/    _/       |*   -   *|  +----------------------+ u
\\\///  _/  _/  _/    _/        `*  `-'  *'                           u
 \XX/  _/ _/   _/    _/          *  ***  *  [e-mail]
      _/_/    _/    _/           **`---'**                            u
                                  *******        Durwood Thrasher     u
                                   *****                              u
----------------------------------------------------------------------

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 21.05.1999, 00:50:15
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 20-May-99 at 15:25:07, Richard M Delzenero wrote these words of wisdom:

>     I have FW97 and received an email via YAM that had
> an attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!

You can try, but do not expect miracles. You MIGHT be able to identify
fragments of words here and there, and LOTS of odd characters and codes and
spaces elsewhere. FW97 does not support Word nor any other PC word processor
document formats. It would be nice if there were a plugin for other document
formats... AREXX maybe? Of course even better would be an updated
FinalWriter with that built-in.

If you are lucky that ".doc" file might be plain text, but until you look at
it you won't know. If it is indeed a Word ",doc" there are Word document
converters on Aminet. Good luck! :)

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Michael =?iso-8859-1?Q?H=F6hne?= <[e-mail]>
   Date: 21.05.1999, 00:52:31
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

 _________________________________________________________________________
|      __   __  __  __  __  __  __    __  __  __  __     |         __     |
|     ///  /_  /_  /_  /_/ /_  /_    /_  /_/ / / ///     |     ____/      |
|    / /  /_  __/ __/ / / /_/ /_    /   / | /_/ ///      |    / / /___/   |
|                                                        |   / / /   /    |
|    Michael Hoehne   /          [e-mail]      |     _/_        |
|       E-Tesh       /  [e-mail]      |                |
|________________________________________________________|________________|

On 20-Mai-99  Richard M Delzenero wrote:

> ...
>
> Hi,
>     I have FW97 and received an email via YAM that had
> an attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!
>
> -- rich delzenero
>
>

You should try "CatDoc" from Aminet!
It converts doc-files (from word) to plain-ASCII, so you are able to import
the text.

cu,
M. Höhne

 _________________________________________________________________________
|   _____                               |  __  __  __  __  ___  __ ___ __ |
|  / ____\ UNITED FEDERATION OF PLANETS | /_   /  /_/ /_/  / / /_/ /  /_  |
| / /    /\ - FEDERAL SCIENCE COUNCIL   |__/  /  / / / | _/_/ / / /  /_   |
| \/____/ / - SciTec4 / Tau Ceti 4      |  __   __   __   __   __    __   |
|  \_____/    Lt. Cmdr. Hoehne [E-Tesh] | |  | |__| |__|  __| |  |  |__   |
|                                       | |__|  __|  __| |__  |__|   __|  |
|_______________________________________|_________________________/_______|



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Vivek Menon <[e-mail]>
   Date: 21.05.1999, 06:28:08
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>    I have FW97 and received an email via YAM that had
>an attachment with name ending in ".doc". I am assuming this
>is a Word format file. Should I be able to read this with
>FW97 as long as it contains nothing fancy (e.g. tables)?
>Many thanks in advance for any response!

I've done it many times.  Just load it into FW, then erase the top junk and
the bottom junk.  All the text should be there.  I have only had a problem
once.

-Vivek A. Menon


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: JESPER KUSK CHRISTENSEN <[e-mail]>
   Date: 21.05.1999, 08:11:23
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi Richard

No, you can not load a Word document into Final Writer. Look for a
utility on aminet called WordConverter. It will convert the document
to ASCII tekst which can be loaded into Final Writer.

Regards

Jesper Kusk Christensen

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Bob Arceneaux <[e-mail]>
   Date: 21.05.1999, 11:08:26
Subject: Re: No subject given

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi, ROBERT, on 17-May-99 you wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hello Morten
>
> Well, one of us is still here.
> I am looking for a very small program for Final Writer (or any Amiga
> program) which will print font samples in the following manner:
>
> **********************************************
> Font   :  `name of font' (Outline, for example)
> Size   :  14, 18, 26, 34,
>
> Sample Printout - - - - - -alphabet or whatever
> **********************************************
>
> I had something once about a million years ago, but the program has
> disappeared. PageStream has something for its own fonts but it is not the
> same thing. I would like to print the woorkbench fonts. Anyone have
> something?
>
>     Try this:
>
>     http://wuarchive.wustl.edu/pub/aminet/text/font/FontList.lha
>
>     Short:  Prints list of fonts in FONTS: device
>     Author: Robert Brandner
>     Source: Fish collection
>
>     Prints a list of the fonts in the FONTS: device to the printer.
>     Prints
>     name, available sizes and some text using the specified font.

I wonder if that could be modified to print fonts from the FW fonts
directory.  I've always done it manually!  I have pages and pages of sample
texts for nearly all of my FW fonts.  Comes in very handy when I'm looking
for a specific "look" in a font.


   Bob
--
<tsb> Bob Arceneaux - *Team #AMIGA#*
<sb> Mandeville, Louisiana, USA
<sb> /You know you're a redneck if/
<tsb>   *You didn't have to leave your house to pick up*
<tsb>   *your date for the prom.*


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Robert Goodlett <[e-mail]>
   Date: 21.05.1999, 11:57:40
Subject: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Fri, 21 May 1999,  Marion E.Wyatt said about " Re: MS doc files(?)":

>  On 20-May-99 at 15:25:07, Richard M Delzenero wrote these words of wisdom:
>
>  >     I have FW97 and received an email via YAM that had
>  > an attachment with name ending in ".doc". I am assuming this
>  > is a Word format file. Should I be able to read this with
>  > FW97 as long as it contains nothing fancy (e.g. tables)?
>  > Many thanks in advance for any response!

> FW97 does not support Word nor any other PC word processor
>  document formats.

Page 14-13 of Final Writer Manual ©1995   `References'

Opening foreign documents
Final Writer can open documents created in WordPerfect,
ProWrite, and PenPal. You open a document created in any of
these word processors just as you open documents created in Final
Writer. There is no conversion process that you are required to do.
When you instruct Final Writer to open a document, it checks to see
who created the document. If the document was created in one of
the above word processors, Final Writer automatically converts it to
a Final Writer document as it is opened. Warning, if you save the
document, it will be saved as a Final Writer document. Therefore, if
you want to retain the document in its original format, you should
make a copy of it before opening it in Final Writer.


>  It would be nice if there were a plugin for other document
>  formats... AREXX maybe? Of course even better would be an updated
>  FinalWriter with that built-in.

That would be nice.


--
[e-mail] (Robert Goodlett)  http://www.eskimo.com/~goody
  Seattle, Wa     No, I'm not in Alaska.   MUI?!,Just say no!
    Microsoft put the 'backward' in backward compatibility


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Darryl Hartwig <[e-mail]>
   Date: 21.05.1999, 19:24:05
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Richard

On 21-May-99, Richard M Delzenero wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi,
>     I have FW97 and received an email via YAM that had an
> attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!

Unfortunately, I doubt it.  But actually it probably will,
but it won't all be readable.  You'll probably get some
text out of it, but there will quite a few control
characters interspersed through the file.

--
Seeya
<tsb>
<sb>Darryl Hartwig
<sb>Buccan, QLD
<sb>BTW, the Amiga is back for the future!
<sb>Member of USANA
<tsb>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Charles Birkner <[e-mail]>
   Date: 21.05.1999, 22:11:46
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>On 21-May-99, Richard M Delzenero wrote:
> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi,
>     I have FW97 and received an email via YAM that had an
> attachment with name ending in ".doc". I am assuming this
> is a Word format file. Should I be able to read this with
> FW97 as long as it contains nothing fancy (e.g. tables)?
> Many thanks in advance for any response!

You know, if Consultron (the makers of CrossMAC and CrossDOS) is still
in biz, or someone like them, perhaps they might see the $$$ potential
in creating a CrossWORD program!  Many times I've had to load the file
in FW on the PeeCee and then save as Amiga version, and then reload it
on the Ami.  I never thought about what to do if I got it thru e-mail
on the Ami... Hmmm.  I guess you cold always e-mail it to yourself
(sorry, it's not meant to be a joke, I actually have done that
with pictures... *sigh*)



--
Charles Birkner                              [e-mail]
State of the Art Technologies                voc:[phone]x110
P.O. Box 38244                               fax:[phone]
Greensboro, NC 27438-8244 USA


   //
 \X/  Windows98=Workbench89
-------------------------------------------------------------------------



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andreas Meyer <[e-mail]>
   Date: 24.05.1999, 10:37:27
Subject: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi ALL!

A question about the possibility in FinalWriter to use two or more columns.
I want to write a little handbook about bees and honey. Using a HP-Deskjet
with german DIN A4-Format (similar to US-letter-size) I thought I can use
two columns to write and format the text and after that fold the pages in
the middle to have the half size, put it together with some clamps? and
give it as an addition to the honey I sell.
The pages should be printed on both sides so I can bind them together.
Can one use the possibility to write in two columns therefore or is this
just a flop in FinalWriter? I know I have to develop my own concept for the
kind of binding the manual but it seems the columns-feature in FinalWriter
is not that simple to use for the binding of pages printed in front
and back.

Any suggestions?


Regards

--


-- Andreas Meyer --

--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 24.05.1999, 11:55:56
Subject: RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Mon, May 24, 1999, at 10:37 AM, Andreas Meyer wrote:

Andreas, which FW do you use. If you have FW97, use text frames and left and
right page designation. Or am I missing something here.
Take care
Johann


> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Hi ALL!
>
> A question about the possibility in FinalWriter to use two or more columns.
> I want to write a little handbook about bees and honey. Using a HP-Deskjet
> with german DIN A4-Format (similar to US-letter-size) I thought I can use
> two columns to write and format the text and after that fold the pages in
> the middle to have the half size, put it together with some clamps? and
> give it as an addition to the honey I sell.
> The pages should be printed on both sides so I can bind them together.
> Can one use the possibility to write in two columns therefore or is this
> just a flop in FinalWriter? I know I have to develop my own concept for the
> kind of binding the manual but it seems the columns-feature in FinalWriter
> is not that simple to use for the binding of pages printed in front
> and back.
>
> Any suggestions?
>
>
> Regards
>
> --
>
>
> -- Andreas Meyer --
>
> --
>
>
> ----
>
> to unsubscribe from fwml, send mail to "[e-mail]" with
> "unsubscribe finalwriter" in the message-body. To get help, send "help".
> Visit the Final Writer website at http://surf.to/finalwriter
>


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 24.05.1999, 12:07:30
Subject: MS Word docs

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

I also have been frustrated to load and then read MS Word files in FW. Lo and
behold, this morning I found in the Aminet files a program "WordComverter". I
have only tried one file conversion and it work just perfect. It will convert to
ASCII, HTML or AmigaGuide. It is fast, comes from Poland, is shareware and worth
the $15.00.I have also tried to use the other programs suggested here
previously, none works as well and is simple to use like WordConverter. Try it,
you might like it.
Johann




----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 24.05.1999, 14:39:20
Subject: Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 20-May-99 at 22:57:40, Robert Goodlett wrote these words of wisdom:
> On Fri, 21 May 1999,  Marion E.Wyatt said about " Re: MS doc files(?)":
>> On 20-May-99 at 15:25:07, Richard M Delzenero wrote these words of
>> wisdom:
>>
>>>     I have FW97 and received an email via YAM that had
>>> an attachment with name ending in ".doc". I am assuming this
>>> is a Word format file. Should I be able to read this with
>>> FW97 as long as it contains nothing fancy (e.g. tables)?
>>> Many thanks in advance for any response!
>
>> FW97 does not support Word nor any other PC word processor
>>  document formats.
>
> Page 14-13 of Final Writer Manual ©1995   `References'
>
> Opening foreign documents
> Final Writer can open documents created in WordPerfect,
> ProWrite, and PenPal.

Those are all AMIGA word processors. Only WordPerfect is also a
PC-compatible program, but I wouldn't expect any version of the PC
WordPerfect documents newer than the last Amiga version to work in
FinalWriter. I doubt many if any versions THAT old are still in use :)

>>  It would be nice if there were a plugin for other document
>>  formats... AREXX maybe? Of course even better would be an updated
>>  FinalWriter with that built-in.
>
> That would be nice.

So any news about the fate of SoftPartners? Are they alive or did they die
before they even got started? What became of those CDs that were supposed
pressed last fall of FinalOffice 1.0? I'd really like a new version of
FinalWriter.

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 24.05.1999, 14:41:48
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 21-May-99 at 08:28:08, Vivek Menon wrote these words of wisdom:

>>     I have FW97 and received an email via YAM that had
>> an attachment with name ending in ".doc". I am assuming this
>> is a Word format file. Should I be able to read this with
>> FW97 as long as it contains nothing fancy (e.g. tables)?
>> Many thanks in advance for any response!
>
> I've done it many times. Just load it into FW, then erase the top junk and
> the bottom junk. All the text should be there. I have only had a problem
> once.

You must be lucky. All the Word docs I have tried to load in FW have had
very little actual text but lots of garbled junk :)

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 24.05.1999, 14:46:43
Subject: Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 21-May-99 at 22:11:46, Charles Birkner wrote these words of wisdom:
>> On 21-May-99, Richard M Delzenero wrote:

>>     I have FW97 and received an email via YAM that had an
>> attachment with name ending in ".doc". I am assuming this
>> is a Word format file. Should I be able to read this with
>> FW97 as long as it contains nothing fancy (e.g. tables)?
>> Many thanks in advance for any response!
>
> You know, if Consultron (the makers of CrossMAC and CrossDOS) is still
> in biz, or someone like them, perhaps they might see the $$$ potential
> in creating a CrossWORD program!  Many times I've had to load the file
> in FW on the PeeCee and then save as Amiga version, and then reload it
> on the Ami.  I never thought about what to do if I got it thru e-mail
> on the Ami... Hmmm.  I guess you cold always e-mail it to yourself
> (sorry, it's not meant to be a joke, I actually have done that
> with pictures... *sigh*)

AFAIK Consultron are alive and well. CrossDOS7.0 Gold is a great product
released last year.

There are several program on Aminet now that can convert Word Docs to text,
and some even handle other PC and Amiga word processor document formats.
Does WordWorth (yeah the competition) import Word docs natively?

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html*


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Sheridan Adams <[e-mail]>
   Date: 24.05.1999, 16:25:20
Subject: RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Andreas,
    I think you will find what you are trying to accomplish is a royal
pain on the patookus with the column feature.  When I have used the column
feature I have found that it starts in the upper left hand corner, works its
way down the left side and when you hit the bottom of the first page,
continues to the right column.  Where you will run into trouble is when you
go to multiple pages.  All the handbooks I have seen work like this:  laying
a sheet of paper down, you have page one on the left side.  We will ignore
the right side for now.  Lay another sheet down, and on the left underside
is page two, topside is page three.  Another sheet is laid down, with the
underside being page four, and the top being page five.  Now move to the
right side of the top sheet.  This would be page six with the underside of
it being page seven.  Below that you have page eight topside and page nine
on the underside.  The sheet on the bottom faceup is page ten.  I assume the
bottom face of the very first page is a title type page.  So what do we
have?

Sheet#    Face/Column    Page#        Face/column    Page#
1     up/left        1        Up/right     10
2    down/left    2        down/right    9
2    up/left         3        up/right        8
3    down/left    4        down/right    7
3    up/left        5        up/right        6


As you can see, it is going to be a pain to print.  What I suggest is that
you figure out how many sheets it is going to be, lay them out, folding as
needed, and number the pages so you can see what page is on what sheet and
where it's located.  Then type the information into FinalWriter as text
blocks.  The reason behind that is you can continue a block (or is a clip? I
can never remember the right term without the manual in front of me) on a
different page and by making the blocks half the width of the page, you can
'columnize' it.



-----Original Message-----
From: Andreas Meyer [mailto:[e-mail]]
Sent: Monday, May 24, 1999 3:37 AM
To: [e-mail]
Subject: Bookwriting


Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hi ALL!

A question about the possibility in FinalWriter to use two or more columns.
I want to write a little handbook about bees and honey. Using a HP-Deskjet
with german DIN A4-Format (similar to US-letter-size) I thought I can use
two columns to write and format the text and after that fold the pages in
the middle to have the half size, put it together with some clamps? and
give it as an addition to the honey I sell.
The pages should be printed on both sides so I can bind them together.
Can one use the possibility to write in two columns therefore or is this
just a flop in FinalWriter? I know I have to develop my own concept for the
kind of binding the manual but it seems the columns-feature in FinalWriter
is not that simple to use for the binding of pages printed in front
and back.

Any suggestions?


Regards

--


-- Andreas Meyer --

--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Craig Richardson <[e-mail]>
   Date: 24.05.1999, 19:09:25
Subject: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Right, I`ve lurked her for a while now. I have a ye ancient final writer
version 1 that I use religiously on my 1200 (6mb ram, 030, fpu, 0.5Gb HD) in
preference to being forced to use a PC, and I`d like to know where I can get
hold of final writer 97, is there a demo avilable from somewhere I could
try, and work it work on my system? I don`t own a CD drive so it would have
to be disk based.

Any help appreciated.
    Craig


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Craig Richardson <[e-mail]>
   Date: 24.05.1999, 19:10:12
Subject: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Right, I`ve lurked her for a while now. I have a ye ancient final writer
version 1 that I use religiously on my 1200 (6mb ram, 030, fpu, 0.5Gb HD) in
preference to being forced to use a PC, and I`d like to know where I can get
hold of final writer 97, is there a demo avilable from somewhere I could
try, and work it work on my system? I don`t own a CD drive so it would have
to be disk based.

Any help appreciated.
    Craig


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Kipling Cooper <[e-mail]>
   Date: 25.05.1999, 00:35:57
Subject: Formatting ASCII files

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Discussion of opening different kinds of documents reminded me of an
irritation while using FW.  When I load an ASCII document, each line has a
hard LF+CR where it was word-wrapped.  With CEDPro, I can redo formatting
via
{AMIGA-F}, is there a way to reformat documents (removing LF+CR's)?

--
Kipling+
<tsb>Team *AMIGA*
Outside of a dog, a book is man's best friend.
Inside of a dog, it's too dark to read.
-- Groucho Marx


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Charles Birkner <[e-mail]>
   Date: 25.05.1999, 05:34:19
Subject: RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 24-May-99, Sheridan Adams wrote:
>Thanks for using NetForward!
>http://www.netforward.com
>v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>Andreas,
>I think you will find what you are trying to accomplish is a royal
[. . .[
>bottom face of the very first page is a title type page.  So what do we
>have?

>Sheet#Face/ColumnPage#Face/columnPage#
>1 up/left    1Up/right 10
>2down/left2down/right9
>2up/left     3up/right    8
>3down/left4down/right7
>3up/left    5up/right    6


>As you can see, it is going to be a pain to print.  What I suggest is that
[. . .]
>'columnize' it.

Andreas,

I distinctly remember some sort of utility (not for FW) that would sort and
separate pages for you solely for folded book styles.  Wonder if there is one
for FW?  Of course, as it is, your columns would be useless as you said, but
you could have a page that was half the size of the paper you are using  (I've
done this before.  For smaller books, I have manually gone through and set the
columns in order (Ack!).  Then someone showed me a collating copier.  My life
then became truly blessed <G>


>-----Original Message-----
>From: Andreas Meyer [mailto:[e-mail]]
>Sent: Monday, May 24, 1999 3:37 AM
>To: [e-mail]
>Subject: Bookwriting

>A question about the possibility in FinalWriter to use two or more columns.
[ . . ]
>is not that simple to use for the binding of pages printed in front
>and back.

>Any suggestions?

--
Charles Birkner                              [e-mail]
State of the Art Technologies                voc:[phone]x110
P.O. Box 38244                               fax:[phone]
Greensboro, NC 27438-8244 USA


   //
 \X/  Windows98=Workbench89
-------------------------------------------------------------------------



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: ThOmAs! <[e-mail]>
   Date: 25.05.1999, 09:16:41
Subject: RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Mon, 24 May 1999, Sheridan Adams wrote:

> Andreas,
>     I think you will find what you are trying to accomplish is a royal
> pain on the patookus with the column feature.  When I have used the column
> feature I have found that it starts in the upper left hand corner, works its
> way down the left side and when you hit the bottom of the first page,
> continues to the right column.  Where you will run into trouble is when you
> go to multiple pages.  All the handbooks I have seen work like this:  laying
> a sheet of paper down, you have page one on the left side.  We will ignore
> the right side for now.  Lay another sheet down, and on the left underside
> is page two, topside is page three.  Another sheet is laid down, with the
> underside being page four, and the top being page five.  Now move to the
> right side of the top sheet.  This would be page six with the underside of
> it being page seven.  Below that you have page eight topside and page nine
> on the underside.  The sheet on the bottom faceup is page ten.  I assume the
> bottom face of the very first page is a title type page.  So what do we
> have?

I agree, what you really need is a pagesetter, PageStream would ofcourse
do the job, I can offer you a possible solution. I think I have a
PostScript program which can do wonders on PostScript code making multiple
sides on on sheet, rotating, make booklets which then get correct page
orientation and placement. However you would need either a PostScript
printer or TurboPrint v7 in order to print the PostScript file.
Please email me in private if this sounds interessting.

Virtually Yours,

.ThOm@s!
--
ICQ:22721053 | http://www.stud.ifi.uio.no/~thomasha
Supporting Amiga/PPC - Only Amiga makes IT possible
"A truly wise man never plays leapfrog with an unicorn"


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 25.05.1999, 09:40:37
Subject: RE: Formatting ASCII files

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, May 25, 1999, at 12:35 AM, Kipling Cooper wrote:

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> Discussion of opening different kinds of documents reminded me of an
> irritation while using FW.  When I load an ASCII document, each line has a
> hard LF+CR where it was word-wrapped.  With CEDPro, I can redo formatting
> via
> {AMIGA-F}, is there a way to reformat documents (removing LF+CR's)?


Kipling, in FW Project Preference check what your settings are for ASCII Input
and Output and change accordingly.
Johann



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Robert Goodlett <[e-mail]>
   Date: 25.05.1999, 11:27:49
Subject: Left/Right Margins??  RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, 25 May 1999,  H.J.C.Sam said about " RE: Bookwriting":

>  Thanks for using NetForward!
>  http://www.netforward.com
>  v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
>  On Mon, May 24, 1999, at 10:37 AM, Andreas Meyer wrote:
>
>  Andreas, which FW do you use. If you have FW97, use text frames and left and
>  right page designation. Or am I missing something here.
>  Take care
>  Johann

Sam, I have wanted to use the Left/Right margins in my Final Writer97
but could not get it to work. I read the manual but that did not help.

I am assuming by your text here that the use of text frames is needed
to use the Left/Right margin settings. Is this correct?

Class     : BookWriting 101 - Final Writer
Instructor: H.J.C. Sam <[e-mail]>
Goal      : Configuring Final Writer to write/print books

                           ;-)


--
[e-mail] (Robert Goodlett)  http://www.eskimo.com/~goody
  Seattle, Wa     No, I'm not in Alaska.   MUI?!,Just say no!
    Microsoft put the 'backward' in backward compatibility


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Robert Goodlett <[e-mail]>
   Date: 25.05.1999, 11:45:44
Subject: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, 25 May 1999,  "Marion E. Wyatt" <[e-mail]> said about " Re: Opening
foreign documents Re: MS doc files(?)":

>  On 20-May-99 at 22:57:40, Robert Goodlett wrote these words of wisdom:
>  > On Fri, 21 May 1999,  Marion E.Wyatt said about " Re: MS doc files(?)":
>  >> On 20-May-99 at 15:25:07, Richard M Delzenero wrote these words of
>  >> wisdom:
>  >>>     I have FW97 and received an email via YAM that had
>  >>> an attachment with name ending in ".doc". I am assuming this
>  >>> is a Word format file. Should I be able to read this with
>  >>> FW97 as long as it contains nothing fancy (e.g. tables)?
>  >>> Many thanks in advance for any response!
>  >> FW97 does not support Word nor any other PC word processor
>  >>  document formats.
>  > Page 14-13 of Final Writer Manual ©1995   `References'
>  > Opening foreign documents
>  > Final Writer can open documents created in WordPerfect,
>  > ProWrite, and PenPal.
>  Those are all AMIGA word processors. Only WordPerfect is also a
>  PC-compatible program, but I wouldn't expect any version of the PC
>  WordPerfect documents newer than the last Amiga version to work in
>  FinalWriter. I doubt many if any versions THAT old are still in use :)

I was only trying to point out that there is at least limited support
for cross platform use.

Keep in mind that Final Writer 97 will read and write in RTF format
also. I think RTF is an acranym for `ReTargetableFormat'. I believe
all modern wordprocessors support RTF.

RTF works well if you need to transfer text only documents.
I have experimented with emailing my brother RTF files from FinalWriter
and he has had no problems reading them with his Windows machine.

With RTF in mind, does anyone have good RTF font settings they could
share? I dont have access to a windows box to see what fonts are
similar between Final Writer and Word or the like.

(For those who dont know: The setting of the fonts is not necessary to
 use RTF as Final Writer will use the default font if none are set)


--
[e-mail] (Robert Goodlett)  http://www.eskimo.com/~goody
  Seattle, Wa     No, I'm not in Alaska.   MUI?!,Just say no!
    Microsoft put the 'backward' in backward compatibility


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andreas Meyer <[e-mail]>
   Date: 25.05.1999, 15:32:34
Subject: Re: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Sheridan

Du hast am 24-Mai-99 unter dem Betreff: RE: Bookwriting folgendes geschrieben:

>     I think you will find what you are trying to accomplish is a royal pain
> on the patookus with the column feature. When I have used the column
> feature I have found that it starts in the upper left hand corner, works
> its way down the left side and when you hit the bottom of the first page,
> continues to the right column. Where you will run into trouble is when
> you go to multiple pages.

You got exactly the point I´m stumbling at.

> Sheet#    Face/Column    Page#        Face/column    Page#
> 1     up/left        1        Up/right     10
> 2    down/left    2        down/right    9
> 2    up/left         3        up/right        8
> 3    down/left    4        down/right    7
> 3    up/left        5        up/right        6
>

Yes, I worked out a similar concept for bothside printing. The terrible
thing is, my FinalWriter Version4.02 disturbes the left and right
pagesettings every time I insert or change some words or sentences. I
have to reformat the whole document every time from the beginning.
With my concept I wanted to write the pages from number one to the middle
of the handbook at first, means one column of every page is empty. After
that I wanted to write from the end to the middle of the document. The big
prblem here is that I cannot change from Insertmode to Overwritemode and so
the whole formating is gone again.

> As you can see, it is going to be a pain to print. What I suggest is that
> you figure out how many sheets it is going to be, lay them out, folding
> as needed, and number the pages so you can see what page is on what sheet
> and where it's located. Then type the information into FinalWriter as
> text blocks. The reason behind that is you can continue a block (or is a
> clip? I can never remember the right term without the manual in front of
> me) on a different page and by making the blocks half the width of the
> page, you can 'columnize' it.

Seems, you are right. After writing every page and knowing how big the
document will be at last I could open a new sheet and insert the single
blocks clip by clip.... hmmm... very good. I shall try this.

What I don´t understand is the feature in FinalWriter to have the
possibility of working with left and right pages when one is at least not
able to print and bind it together in a reasonable way. ;)

All right Sheridan, thanks for your help. I shall come up again when I get
non soluble problems.

BTW in landscape-printing my deskjet shows some ugly terms....


Regards

--


-- Andreas Meyer --

--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Warren Katchmar <[e-mail]>
   Date: 25.05.1999, 17:43:46
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello,

MW Thanks for using NetForward!
MW http://www.netforward.com
MW v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

MW On 24-May-99 at 14:09:25, Craig Richardson wrote these words of wisdom:

MW> Right, I`ve lurked her for a while now. I have a ye ancient final
MW> writer version 1 that I use religiously on my 1200 (6mb ram, 030, fpu,
MW> 0.5Gb HD) in preference to being forced to use a PC, and I`d like to
MW> know where I can get hold of final writer 97, is there a demo avilable
MW> from somewhere I could try, and work it work on my system? I don`t own
MW> a CD drive so it would have to be disk based.

MW Try Amiga dealers. They may still have some FinalWriter97 copies on the
MW shelf. Try SoftwareHut:1-800-93-AMIGA, CompuQuick:1-614-235-1180,
MW SafeHarbor:1-800-544-6599 or your local/near-local Amiga dealer. If you
MW need webpage or email addresses for the above I can send them too. but a
MW quick phone call will tell you if any of the 3 above dealers have it.
MW You might also ask about Final Office 1.0 which contains FW97,
MW FinalData, FinalCalc, FW(Win95), and a clipart collection for around the
MW price Fw97 sold for last year alone. AFAIK there are no demo versions of
MW FW, and if their were I'm sure they would be limited to no saving or
MW printing, etc.


Yes, there was a demo of FinalWriter 4 Lite.  It is from Amiga Format Disk
82a.  Yes it has no saving, printing yes.  There may be some other things I
have not tired all the options.

If interested let me know offline.

--

<tsb>

<sb> Warren T. Katchmar

<tsb>






----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 25.05.1999, 18:05:10
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 24-May-99 at 14:09:25, Craig Richardson wrote these words of wisdom:

> Right, I`ve lurked her for a while now. I have a ye ancient final writer
> version 1 that I use religiously on my 1200 (6mb ram, 030, fpu, 0.5Gb HD)
> in preference to being forced to use a PC, and I`d like to know where I
> can get hold of final writer 97, is there a demo avilable from somewhere I
> could try, and work it work on my system? I don`t own a CD drive so it
> would have to be disk based.

Try Amiga dealers. They may still have some FinalWriter97 copies on the
shelf. Try SoftwareHut:1-800-93-AMIGA, CompuQuick:1-614-235-1180,
SafeHarbor:1-800-544-6599 or your local/near-local Amiga dealer. If you need
webpage or email addresses for the above I can send them too. but a quick
phone call will tell you if any of the 3 above dealers have it. You might
also ask about Final Office 1.0 which contains FW97, FinalData, FinalCalc,
FW(Win95), and a clipart collection for around the price Fw97 sold for last
year alone. AFAIK there are no demo versions of FW, and if their were I'm
sure they would be limited to no saving or printing, etc.

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 25.05.1999, 18:08:01
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 24-May-99 at 14:10:12, Craig Richardson wrote these words of wisdom:

> Right, I`ve lurked her for a while now. I have a ye ancient final writer
> version 1 that I use religiously on my 1200 (6mb ram, 030, fpu, 0.5Gb HD)
> in preference to being forced to use a PC, and I`d like to know where I
> can get hold of final writer 97, is there a demo avilable from somewhere I
> could try, and work it work on my system? I don`t own a CD drive so it
> would have to be disk based.

Oh yeah. FW97 only ships on diskettes, but FinalOffice if it ever shipped
was supposed to be CD only.

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: H.J.C. Sam <[e-mail]>
   Date: 25.05.1999, 18:54:33
Subject: RE: Left/Right Margins??  RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, May 25, 1999, at 11:27 AM, Robert Goodlett wrote:

> Thanks for using NetForward!
> http://www.netforward.com
> v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
>
> On Tue, 25 May 1999,  H.J.C.Sam said about " RE: Bookwriting":
>
> >  Thanks for using NetForward!
> >  http://www.netforward.com
> >  v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
> >
> >  On Mon, May 24, 1999, at 10:37 AM, Andreas Meyer wrote:
> >
> >  Andreas, which FW do you use. If you have FW97, use text frames and
> left and
> >  right page designation. Or am I missing something here.
> >  Take care
> >  Johann
>
> Sam, I have wanted to use the Left/Right margins in my Final Writer97
> but could not get it to work. I read the manual but that did not help.
>
> I am assuming by your text here that the use of text frames is needed
> to use the Left/Right margin settings. Is this correct?

Robert, text frames do not depend on L/R margin setting. Your margin setting fixes
your edit area.- (never to be larger than print margins of your printer)- . If
you want to have left and right pages, as in a book where the larger margin is
on the inside, tick Left/Right in Page-set-up. Reference Pages 2-12, 4-6, 7-32
in FW Manual.
Unfortunately I have not reached the instructor level. I am an autodidact in
Final Writer and that is dangerous.
Johann
in Sequim,
where the sun always shines
and the rain is shifted to Seattle.

>
> Class     : BookWriting 101 - Final Writer
> Instructor: H.J.C. Sam <[e-mail]>
> Goal      : Configuring Final Writer to write/print books
>
>                            ;-)


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Jürgen =?iso-8859-1?Q?M=FCller?= <[e-mail]>
   Date: 25.05.1999, 22:47:51
Subject: Re: Formatting ASCII files

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Kipling

On 25-Mai-99, you wrote:

> Discussion of opening different kinds of documents reminded me of an
> irritation while using FW.  When I load an ASCII document, each line has a
> hard LF+CR where it was word-wrapped.  With CEDPro, I can redo formatting
> via
> {AMIGA-F}, is there a way to reformat documents (removing LF+CR's)?

Before you open a document goto the menu project/preferences. Choose the
ASCII tab. Uncheck the first entry and save the setting.
Sorry for that bad description. I have FW97 german version.

Regards
--
Jürgen Müller
*Team Amiga*
ICQ UIN: 36642173


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Charles Birkner <[e-mail]>
   Date: 25.05.1999, 23:13:07
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 25-May-99, Marion E. Wyatt wrote:
>Thanks for using NetForward!
>http://www.netforward.com
>v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>On 24-May-99 at 14:09:25, Craig Richardson wrote these words of wisdom:

>> Right, I`ve lurked her for a while now. I have a ye ancient final writer
>> version 1 that I use religiously on my 1200 (6mb ram, 030, fpu, 0.5Gb HD)
>> in preference to being forced to use a PC, and I`d like to know where I
>> can get hold of final writer 97, is there a demo avilable from somewhere I
>> could try, and work it work on my system? I don`t own a CD drive so it
>> would have to be disk based.

>Try Amiga dealers. They may still have some FinalWriter97 copies on the
>shelf. Try SoftwareHut:1-800-93-AMIGA, CompuQuick:1-614-235-1180,
>SafeHarbor:1-800-544-6599 or your local/near-local Amiga dealer. If you need
>webpage or email addresses for the above I can send them too. but a quick
>phone call will tell you if any of the 3 above dealers have it. You might
>also ask about Final Office 1.0 which contains FW97, FinalData, FinalCalc,
>FW(Win95), and a clipart collection for around the price Fw97 sold for last
>year alone. AFAIK there are no demo versions of FW, and if their were I'm
>sure they would be limited to no saving or printing, etc.

Actually, there WAS a Copy of FW lite (without Speller, Thesaurus, etc...)>  I
received off of a Magazine Coverdisk, and heard it was (WAS) on SW'w WebSite.
Not too shabby, it was not 'quite' fw97,...  But it was great for a lowmem
machine!



--
Charles Birkner                              [e-mail]
State of the Art Technologies                voc:[phone]x110
P.O. Box 38244                               fax:[phone]
Greensboro, NC 27438-8244 USA


   //
 \X/  Windows98=Workbench89
-------------------------------------------------------------------------



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Charles Birkner <[e-mail]>
   Date: 25.05.1999, 23:24:30
Subject: Re: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 25-May-99, Robert Goodlett wrote:
>Thanks for using NetForward!
>http://www.netforward.com
>v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

>On Tue, 25 May 1999,  "Marion E. Wyatt" <[e-mail]> said about " Re:
>Opening
>foreign documents Re: MS doc files(?)":

>>  On 20-May-99 at 22:57:40, Robert Goodlett wrote these words of wisdom:
>>  > On Fri, 21 May 1999,  Marion E.Wyatt said about " Re: MS doc files(?)":
>>  >> On 20-May-99 at 15:25:07, Richard M Delzenero wrote these words of
>>  >> wisdom:
>>  >>>     I have FW97 and received an email via YAM that had
>>  >>> an attachment with name ending in ".doc". I am assuming this
>>  >>> is a Word format file. Should I be able to read this with
>>  >>> FW97 as long as it contains nothing fancy (e.g. tables)?
>>  >>> Many thanks in advance for any response!
>>  >> FW97 does not support Word nor any other PC word processor
>>  >>  document formats.
>>  > Page 14-13 of Final Writer Manual ©1995   `References'
>>  > Opening foreign documents
>>  > Final Writer can open documents created in WordPerfect,
>>  > ProWrite, and PenPal.
>>  Those are all AMIGA word processors. Only WordPerfect is also a
>>  PC-compatible program, but I wouldn't expect any version of the PC
>>  WordPerfect documents newer than the last Amiga version to work in
>>  FinalWriter. I doubt many if any versions THAT old are still in use :)

>I was only trying to point out that there is at least limited support
>for cross platform use.

>Keep in mind that Final Writer 97 will read and write in RTF format
>also. I think RTF is an acranym for `ReTargetableFormat'. I believe
>all modern wordprocessors support RTF.

>RTF works well if you need to transfer text only documents.
>I have experimented with emailing my brother RTF files from FinalWriter
>and he has had no problems reading them with his Windows machine.

>With RTF in mind, does anyone have good RTF font settings they could
>share? I dont have access to a windows box to see what fonts are
>similar between Final Writer and Word or the like.

>(For those who dont know: The setting of the fonts is not necessary to
> use RTF as Final Writer will use the default font if none are set)


>--
>[e-mail] (Robert Goodlett)  http://www.eskimo.com/~goody
>  Seattle, Wa     No, I'm not in Alaska.   MUI?!,Just say no!
>    Microsoft put the 'backward' in backward compatibility


Actually, it's R)ich T)ext F)ormat, but you are right on all other counts!
;^)
--
Charles Birkner                              [e-mail]
State of the Art Technologies                voc:[phone]x110
P.O. Box 38244                               fax:[phone]
Greensboro, NC 27438-8244 USA


   //
 \X/  Windows98=Workbench89
-------------------------------------------------------------------------



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Robert Goodlett <[e-mail]>
   Date: 25.05.1999, 23:46:26
Subject: Re: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, 25 May 1999,  Marion E.Wyatt said about " Re: RTF  Re: Opening foreign
documents Re: MS doc files(?)":

>  > With RTF in mind, does anyone have good RTF font settings they could
>  > share? I dont have access to a windows box to see what fonts are
>  > similar between Final Writer and Word or the like.
>
>  Actually if you install PS Type 1 or True Type Fonts you can use the same
>  fonts as PC users.

Thanks for the tip.

I wish I understood PS fonts better. Some are binary files and others
are ascii files. Guess I'll have to read the manual and see if it will
shed some light.


--
[e-mail] (Robert Goodlett)  http://www.eskimo.com/~goody
  Seattle, Wa     No, I'm not in Alaska.   MUI?!,Just say no!
    Microsoft put the 'backward' in backward compatibility


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 26.05.1999, 00:45:33
Subject: Re: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 24-May-99 at 23:45:44, Robert Goodlett wrote these words of wisdom:
> On Tue, 25 May 1999, "Marion E. Wyatt" <[e-mail]> said about " Re:
> Opening foreign documents Re: MS doc files(?)":
>> On 20-May-99 at 22:57:40, Robert Goodlett wrote these words of wisdom:

>>> Page 14-13 of Final Writer Manual ©1995   `References'
>>> Opening foreign documents
>>> Final Writer can open documents created in WordPerfect,
>>> ProWrite, and PenPal.

>> Those are all AMIGA word processors. Only WordPerfect is also a
>> PC-compatible program, but I wouldn't expect any version of the PC
>> WordPerfect documents newer than the last Amiga version to work in
>> FinalWriter. I doubt many if any versions THAT old are still in use :)
>
> I was only trying to point out that there is at least limited support
> for cross platform use.

Ok :) But the original poster wanted to import what he thought was a MS Word
".doc" document.

> Keep in mind that Final Writer 97 will read and write in RTF format
> also. I think RTF is an acranym for `ReTargetableFormat'. I believe
> all modern wordprocessors support RTF.

Rich Text Format

> RTF works well if you need to transfer text only documents.
> I have experimented with emailing my brother RTF files from FinalWriter
> and he has had no problems reading them with his Windows machine.

Great. RTF is a very good means to transfer files across platforms to
retain basic document layout more so than a plain ASCII text file :)

> With RTF in mind, does anyone have good RTF font settings they could
> share? I dont have access to a windows box to see what fonts are
> similar between Final Writer and Word or the like.

Actually if you install PS Type 1 or True Type Fonts you can use the same
fonts as PC users.

> (For those who dont know: The setting of the fonts is not necessary to
> use RTF as Final Writer will use the default font if none are set)

Yeppers :)

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html*

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter



**********
   From: Billy Horton <[e-mail]>
   Date: 26.05.1999, 09:13:36
Subject: Re: Font detail macro

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello Bob,

On 21-May-99, Bob Arceneaux wrote:

> I wonder if that could be modified to print fonts from the FW fonts
> directory. I've always done it manually! I have pages and pages of sample
> texts for nearly all of my FW fonts. Comes in very handy when I'm looking
> for a specific "look" in a font.

There's an ARexx script called FontDetail.rexx that will generate the
complete character set using the current font.  I believe it came in one of
those macro collections from Aminet.  I'm not sure what the collection is
called, but if you like I could explore and get that for you.  I always just
downloaded all the macros that had anything to do with FW.

This script is very good, I use it to print out all the fonts that were not
in the FW manual.

Regards,
Billy Horton
Video Image Productions
Hattiesburg, MS
The birthplace of Rock-N-Roll (look it up!)
-----------------------------------------------
You can tell some people aren't afraid of work be the way they fight it.


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Harry Runge <[e-mail]>
   Date: 26.05.1999, 10:34:22
Subject: RE: Left/Right Margins??  RE: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On Tue, May 25, 1999, at 11:27 AM, Robert Goodlett wrote:

> On Tue, 25 May 1999,  H.J.C.Sam said about " RE: Bookwriting":
>
> >  Thanks for using NetForward!
> >  http://www.netforward.com
> >  v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v
> >
> >  On Mon, May 24, 1999, at 10:37 AM, Andreas Meyer wrote:
> >
> >  Andreas, which FW do you use. If you have FW97, use text frames and
> left and
> >  right page designation. Or am I missing something here.
> >  Take care
> >  Johann
>
> Sam, I have wanted to use the Left/Right margins in my Final Writer97
> but could not get it to work. I read the manual but that did not help.
>
> I am assuming by your text here that the use of text frames is needed
> to use the Left/Right margin settings. Is this correct?
>
> Class     : BookWriting 101 - Final Writer
> Instructor: H.J.C. Sam <[e-mail]>
> Goal      : Configuring Final Writer to write/print books

To All:

Have been following this thread for some days.  Below are two macros I
wrote a couple of years ago which some may find useful.  Both print a
document on both sides, number the pages, and come out of the printer ready
to staple.  For bookwriting purposes and your specific printer, they may
need modification.  Suggest a test run before you try anything major.

Harry

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A-1000: Rejuvenator - Derringer50MHz/68030 - 34.5 MBytes RAM - DOS3.1
 ***    4 Quantums (2.3 Gig) - 4 floppies (one 5.25) - Toshiba CD-ROM
Since   HP5P ScanJet - Zoom 33.6 FaxModem - MicroWay FlickerFixer
 1986   Compaq 15"VGA - DCTV - DigiView - Canon7000 -  Iomega Zip-100
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


==========================================================================
/* Print Doc Both Sides Auto Page Number */
/* This Macro was written for the HP - 500C */
/* It may have to be revised to accomodate other printers */

/* Set up auto page number to print in the bottom center */
/* side of the page */

Options Results
EditRightMaster
DO i = 1 to 48
NewParagraph
END i
Justify Center
Insert PageNumber
SelectAll
Font "ITC Cheltenham"

/* Selects font for printing */


EditBody
SelectAll
Font "ITC Cheltenham"
Cursor Right

/* Prints Odd pages first from back to front */
PrintSetup COLLATE OddOnly ORDER BackToFront
Print

/* Pauses printing while pages are reinserted */
/* Top of the pages toward the print head */
ShowMessage 1 0  ' "Reinsert Pages Face Up"  ""  ""  "Continue"  ""  "" '

/* Resets auto page number to print in bottom center of page */
EditRightMaster
SelectAll
Cut
Indent 0
DO i = 1 to 48
NewParagraph
END i
Justify Center
Insert PageNumber

/* Continues printing the even pages */
/* When the document is complete all pages will be in order */
/* ready to staple or bind */


EditBody
PrintSetup COLLATE EvenOnly ORDER FrontToBack
Print

/* Resets to clear footer, back to original font */
/* and returns to the top of the document */
EditRightMaster
SelectAll
Cut
EditBody
SelectAll
Font "Quebec_Bold"
Cursor Right
MoveToLine 1 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
/* Print Doc Both Sides Auto Page Number */
/* This Macro was written for the HP - 500C */
/* It may have to be revised to accomodate other printers */

/* Set up auto page number to print in the bottom right */
/* side of the page */

Options Results
EditRightMaster
DO i = 1 to 48
NewParagraph
END i
Justify Right
Insert PageNumber
SelectAll
Font "ITC Cheltenham"

/* Selects font for printing */


EditBody
SelectAll
Font "ITC Cheltenham"
Cursor Right

/* Prints Odd pages first from back to front */
PrintSetup COLLATE OddOnly ORDER BackToFront
Print

/* Pauses printing while pages are reinserted */
/* Top of the pages toward the print head */
ShowMessage 1 0  ' "Reinsert Pages Face Up"  ""  ""  "Continue"  ""  "" '

/* Resets auto page number to print in bottom left of page */
EditRightMaster
SelectAll
Cut
Indent 0
DO i = 1 to 48
NewParagraph
END i
Justify Left
Insert PageNumber

/* Continues printing the even pages */
/* When the document is complete all pages will be in order */
/* ready to staple or bind */


EditBody
PrintSetup COLLATE EvenOnly ORDER FrontToBack
Print

/* Resets to clear footer, back to original font */
/* and returns to the top of the document */
EditRightMaster
SelectAll
Cut
EditBody
SelectAll
Font "Quebec_Bold"
Cursor Right
MoveToLine 1 0



----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Warren Katchmar <[e-mail]>
   Date: 26.05.1999, 10:52:09
Subject: Re: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello,


<snip>

MW> With RTF in mind, does anyone have good RTF font settings they could
MW> share? I dont have access to a windows box to see what fonts are
MW> similar between Final Writer and Word or the like.

MW Actually if you install PS Type 1 or True Type Fonts you can use the
MW same fonts as PC users.


Okay, how hard is it to install PS Type 1 or True Type Fonts???



MW> (For those who dont know: The setting of the fonts is not necessary to
MW> use RTF as Final Writer will use the default font if none are set)

MW Yeppers :)

--

<tsb>

<sb> Warren T. Katchmar

<tsb>






----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Craig Richardson <[e-mail]>
   Date: 26.05.1999, 12:11:25
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

I`ve seen a cover disk version but can`t seem to get my hands on it. Web
site addresses would be the most useful though, since calling UK to USA
tends to be a little expensive for a poor student like me!

Cheers,
Craig


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 27.05.1999, 01:58:24
Subject: Re: Help!

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 26-May-99 at 07:11:25, Craig Richardson wrote these words of wisdom:

> I`ve seen a cover disk version but can`t seem to get my hands on it. Web
> site addresses would be the most useful though, since calling UK to USA
> tends to be a little expensive for a poor student like me!

That's why e-mail is a great service:) Within a few days you can get an
answer about a product.

If I recall FinalWriter 4 Lite was also a product for sale at a smaller cost
than the version4 that was shipping at the time. After FW4 there was FW5,
FW6, then FW97.

Here are the email/URLs for the 3 US dealers I mentioned in an earlier post.

Software Hut http://www.softhut.com [e-mail]
CompuQuick http://www.infinet.com/~compuquick [e-mail]
Safe Harbor http://www.sharbor.com [e-mail]

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Marion E. Wyatt <[e-mail]>
   Date: 27.05.1999, 03:34:46
Subject: Re: RTF  Re: Opening foreign documents Re: MS doc files(?)

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

On 26-May-99 at 13:52:09, Warren Katchmar wrote these words of wisdom:

> <snip>
>
>> With RTF in mind, does anyone have good RTF font settings they could
>> share? I dont have access to a windows box to see what fonts are
>> similar between Final Writer and Word or the like.
>
> MW Actually if you install PS Type 1 or True Type Fonts you can use the
> MW same fonts as PC users.
>
> Okay, how hard is it to install PS Type 1 or True Type Fonts???

From Aminet grab type.library and ttf.library and voila you can use PS Type
1 and True Type Fonts in any Amiga application that can use CompuGraphic
outline fonts :) If you get TTF.library from Aminet look at the docs and get
the newest library from the support site as it is newer than the version on
Aminet.

It is quit simple after you install the libraries. Download some fonts
offline or buy some.... or if you bought a printer in the past 4 or 5 years
you probably have some floppies or a CD with TTF fonts on them. There are
also websites with TTF and/or PS Type 1 fonts.

--
Marion E. Wyatt  AMIGA3000 CSPPC/233+060/50 CV64/3D OS3.1 138MB 1GB ZIP100
[e-mail]  / // / I support commercial  Only AMIGA Makes It Possible!
        __ __  / // /  and shareware progs     AMIGA * Back For The FUTURE
Member  \ \\ \/ // /                               Dare To Dream AMIGA!
of       \ \\/ // /      * A M I G A   I N T E R N A T I O N A L   I N C *
Team AMIGA\_/_//_/              and        * * A M I G A * *
                    My homepage  *  http://www.users.kih.net/~mwyatt
Amiga Connexion * http://www.users.kih.net/~mwyatt/AmigaConnexion.html


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********
   From: Andreas Meyer <[e-mail]>
   Date: 28.05.1999, 21:49:27
Subject: Re: Bookwriting

Thanks for using NetForward!
http://www.netforward.com
v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v^v

Hello ThOmAs!

Du hast am 25-Mai-99 unter dem Betreff: RE: Bookwriting folgendes geschrieben:

>
> I agree, what you really need is a pagesetter, PageStream would ofcourse
> do the job, I can offer you a possible solution. I think I have a
> PostScript program which can do wonders on PostScript code making
> multiple sides on on sheet, rotating, make booklets which then get
> correct page orientation and placement. However you would need either a
> PostScript printer or TurboPrint v7 in order to print the PostScript
> file. Please email me in private if this sounds interessting.

Thank you for offering your help. But after a lot of work and patience
and %å@°&% I have the little book built together with FinalWriter.
I printed it out with my Deskjet after playing around with the options
in TurboPrint and it locks perfect :-)
Is there a demoversion of PageStream somewhere?

I want to thank everybody who gave me some help with this!

BTW I´m looking for some pictures about bees... I have a lot of CD´s
here, but can´t find anything about this little nice flies.


Regards

--


-- Andreas Meyer --

--


----

to unsubscribe from fwml, send mail to "[e-mail]" with
"unsubscribe finalwriter" in the message-body. To get help, send "help".
Visit the Final Writer website at http://surf.to/finalwriter


**********